Ship Liferaft Light Life Jacket Light Lifesaving Indication Signal
Light
Decription:
The SM86951 liferaft light comprises three items:
1) The external light with wire
2) The internal light with wire
3) Battery body
The external light and internal light are connected with battery
body by two individual wire-connectors. The
battery powers both of internal and external lights. When the
liferaft is inflated, the battery can be
automatically activated by pulling out “O” ring and both of lights
are activated at the same time. The external
light is a high intensity flashing light for mounting externally on
liferaft to signal for rescue. The internal light
is an adequate steady light for reading inside a covered liferaft.
The two units are sealed and watertight.
Product Standard
The latest SOLAS Regulation;
MSC81. (70)
ISO24408:2005
ISO9001:2008 QMS (Approval by DNV)
ISO24408:2005
Material Use:
The lamp cover is transparent, the other plastic parts could be
changed the color according to the
requirement of customer.
All the plastic parts are produced in a high performance
polycarbonate.
The red master switches, on the main body, are coated with clear
protective plastic film, have clear
operating instructions and are simple to switch on and off
individually external and internal light.
The connector wire is made in PVC.
The battery type is heavy duty lithium.
The main body and lamp cover with PCB is sealed by AB gum which has
the advantaged water-proof
performance and prevent corrosion and mould growth.
Technical Parameters
| Specification |
| Outside light intensity | > 4.3cd | flash rate: | 50-70times/min |
| Inside light intensity | >0.5cd | color of light: | White |
| Working time: | >12h | out size | 72×38.8×41mm |
| Working Voltage: | 3.6V | Weight | 305g |
| LED power | 0.5W, 120mA | Capasity of battery | 13Ah |
| temperature range: | -30~65 | Waranty | 5 Years |
| water temp range | -1~30 | Light Battery | ER34615M |
Installation:
In order to ensure that the handspike could not be turned on
because of strong vibration during the ocean
shipment, every light is added a safety lock on handspike before
packing. So before installation, the first thing
is to pull off the lock and fit the “O” ring in the hole of
handspike. Please install liferaft light according to the
below pictures.
Turn on the connector to separate the external and internal light
from battery body;
Cross the external light through the fabric of liferaft and fix the
external light on the apex of the canopy
like the below pictures.
The internal light should be installed inside the liferaft as same
as the method of fixing external light,
where it is easily visible for reading the instruction.
Battery body should be installed the proper place inside liferaft.
On the one hand, “O” ring should be fixed
tightly with something inside liferaft by cord so that it must be
pulled out to automantically activate the
external and internal light when the liferaft is inflated. On the
other hand, the manual switches for external and internal lights
could be easily operated when the lights are working.
After fixing securely external light and internal light and battery
body, connect the external and internal
light with battery body carefully and tightly. Then the whole
installation is finished.
Operation:
When the liferaft is inflated, the battery can be activated by
pulling out “O” ring and the external and internal
lights are activated at the same time. The user can press “internal
light” switch to turn off or on the internal
light, and press “external light” switch to turn off or on the
external light. These manual operations could save
discharging battery in the daytime so that the light could be used
longer time. If user want to turn off these
two light completely, only it is ok to place the “O” ring back to
the primary position again.
Products photos
